Publications

2018

T. M. Huber et al., “Interplay of Grain Size Dependent Electronic and Ionic Conductivity in Electrochemical Polarization Studies on Sr-Doped LaMnO $_\textrm3$ (LSM) Thin Film Cathodes”, Journal of The Electrochemical Society, vol. 165. p. F702—F709, 2018.
H. Lin et al., “Mid-infrared waveguide integrated chalcogenide glass on black phosphorus photodetectors”, in Conference on Lasers and Electro-Optics, San Jose, California, 2018, p. SM2I.8.
G. G. D. Han, Deru, J. H., Cho, E. N., and Grossman, J. C., “Optically-regulated thermal energy storage in diverse organic phase-change materials”, Chemical Communications, vol. 54. pp. 10722-10725, 2018.
K. H. Lee et al., “Monolithic Integration of Si-CMOS and III-V-on-Si Through Direct Wafer Bonding Process”, IEEE Journal of the Electron Devices Society, vol. 6. pp. 571-578, 2018.

2017

C. A. Schuh, Hono, K., Wagner, W. R., Gault, B., Angelo, J. D., and Gray, G. T., “Paths to Open Access: An update from Acta Materialia, Inc.”, Acta Biomaterialia, vol. 60. pp. 1-2, 2017.
M. Koyama et al., “Recent progress in microstructural hydrogen mapping in steels: quantification, kinetic analysis, and multi-scale characterisation”, Materials Science and Technology, vol. 33. pp. 1481-1496, 2017.
C. A. Schuh, “Recipients of the 2016 Acta student awards”, Acta Materialia, vol. 137. p. 123, 2017.
S. -J. Kim et al., “Bioinspired Catalysts: Exceptional High-Performance of Pt-Based Bimetallic Catalysts for Exclusive Detection of Exhaled Biomarkers (Adv. Mater. 36/2017)”, Advanced Materials, vol. 29. 2017.
R. I. Made et al., “Characterisation of defects generated during constant current InGaN-on-silicon LED operation”, Microelectronics Reliability, vol. 76-77. pp. 561-565, 2017.
M. Balinskiy, Ojha, S., Chiang, H., Ranjbar, M., Ross, C. A., and Khitun, A., “Spin wave excitation in sub-micrometer thick Y $_\textrm3$ Fe $_\textrm5$ O $_\textrm12$ films fabricated by pulsed laser deposition on garnet and silicon substrates: A comparative study”, Journal of Applied Physics, vol. 122. p. 123904, 2017.
R. Schmitt, Spring, J., Korobko, R., and Rupp, J. L. M., “Design of Oxygen Vacancy Configuration for Memristive Systems”, ACS Nano, vol. 11. pp. 8881-8891, 2017.
Z. Du et al., “Synthesis of monodisperse CeO $_\textrm2$ -ZrO $_\textrm2$ particles exhibiting cyclic superelasticity over hundreds of cycles”, Journal of the American Ceramic Society, vol. 100. pp. 4199-4208, 2017.
W. D. Judge, Allanore, A., Sadoway, D. R., and Azimi, G., “E-logpO2 diagrams for ironmaking by molten oxide electrolysis”, Electrochimica Acta, vol. 247. pp. 1088-1094, 2017.
S. Dutta, Siddiqui, S. A., Currivan-Incorvia, J. A., Ross, C. A., and Baldo, M. A., “The Spatial Resolution Limit for an Individual Domain Wall in Magnetic Nanowires”, Nano Letters, vol. 17. pp. 5869-5874, 2017.
A. Canales, Park, S., Lu, C., Fink, Y., and Anikeeva, P. O., “Electronic, optical, and chemical interrogation of neural circuits with multifunctional fibers (Conference Presentation)”, in Biosensing and Nanomedicine X, San Diego, United States, 2017, p. 20.
S. -J. Kim et al., “Exceptional High-Performance of Pt-Based Bimetallic Catalysts for Exclusive Detection of Exhaled Biomarkers”, Advanced Materials, vol. 29. p. 1700737, 2017.
W. A. Sasangka, Syaranamual, G. J., Gao, Y., Made, R. I., Gan, C. L., and Thompson, C. V., “Improved reliability of AlGaN/GaN-on-Si high electron mobility transistors (HEMTs) with high density silicon nitride passivation”, Microelectronics Reliability, vol. 76-77. pp. 287-291, 2017.
S. Woo and Beach, G. S. D., “Control of propagating spin-wave attenuation by the spin-Hall effect”, Journal of Applied Physics, vol. 122. p. 093901, 2017.
R. H. Taylor, Larson, H. R., and Eagar, T. W., “Electric Arc Holes in Corrugated Stainless Steel Tubing”, Fire Technology, vol. 53. pp. 1919-1932, 2017.
L. He et al., “Loss reduction of silicon-on-insulator waveguides for deep mid-infrared applications”, Optics Letters, vol. 42. p. 3454, 2017.
N. L. Klyachko et al., “Macrophages with cellular backpacks for targeted drug delivery to the brain”, Biomaterials, vol. 140. pp. 79-87, 2017.
C. Zhang et al., “Magnetic and Photoluminescent Coupling in SrTi $_\textrm0.87$ Fe $_\textrm0.13$ O $_\textrm3−δ$ /ZnO Vertical Nanocomposite Films”, ACS Applied Materials \& Interfaces, vol. 9. pp. 32359-32368, 2017.
M. -M. Wang, Hell, J. -C., and Tasan, C. C., “Martensite size effects on damage in quenching and partitioning steels”, Scripta Materialia, vol. 138. pp. 1-5, 2017.
E. Kim et al., “Machine-learned and codified synthesis parameters of oxide materials”, Scientific Data, vol. 4. p. 170127, 2017.
X. Fu, Schuh, C. A., and Olivetti, E. A., “Materials selection considerations for high entropy alloys”, Scripta Materialia, vol. 138. pp. 145-150, 2017.
G. Romano and Grossman, J. C., “Phonon bottleneck identification in disordered nanoporous materials”, Physical Review B, vol. 96. 2017.
M. Youssef, Van Vliet, K. J., and Yildiz, B., “Polarizing Oxygen Vacancies in Insulating Metal Oxides under a High Electric Field”, Physical Review Letters, vol. 119. 2017.
S. Huberman et al., “Unifying first-principles theoretical predictions and experimental measurements of size effects in thermal transport in SiGe alloys”, Physical Review Materials, vol. 1. 2017.
A. J. Birnbaum, Thompson, C. V., Steuben, J. C., Iliopoulos, A. P., and Michopoulos, J. G., “Oxygen-induced giant grain growth in Ag films”, Applied Physics Letters, vol. 111. p. 163107, 2017.
C. A. Schuh, Hono, K., Wagner, W. R., Gault, B., Angelo, J. D., and Gray, G. T., “Paths to open access: An update from Acta Materialia, Inc.”, Acta Materialia, vol. 139. pp. 261-262, 2017.
C. A. Schuh, “Acta Journals Editors Transitioning to Joint Appointments”, Acta Materialia, vol. 138. p. 237, 2017.
Z. Li et al., “Air-Breathing Aqueous Sulfur Flow Battery for Ultralow-Cost Long-Duration Electrical Storage”, Joule, vol. 1. pp. 306-327, 2017.
P. M. Larsen, Kalidindi, A. R., Schmidt, S., and Schuh, C. A., “Alloy design as an inverse problem of cluster expansion models”, Acta Materialia, vol. 139. pp. 254-260, 2017.
M. Mann and Beach, G. S. D., “Reduction of in-plane field required for spin-orbit torque magnetization reversal by insertion of Au spacer in Pt/Au/Co/Ni/Co/Ta”, APL Materials, vol. 5. p. 106104, 2017.
R. M. Moghadam et al., “An Ultrathin Single Crystalline Relaxor Ferroelectric Integrated on a High Mobility Semiconductor”, Nano Letters, vol. 17. pp. 6248-6257, 2017.
B. Heshmat et al., “Terahertz scattering and water absorption for porosimetry”, Optics Express, vol. 25. p. 27370, 2017.
H. Somekawa, Tsuru, T., Singh, A., Miura, S., and Schuh, C. A., “Effect of crystal orientation on incipient plasticity during nanoindentation of magnesium”, Acta Materialia, vol. 139. pp. 21-29, 2017.
F. Büttner et al., “Field-free deterministic ultrafast creation of magnetic skyrmions by spin–orbit torques”, Nature Nanotechnology, vol. 12. pp. 1040-1044, 2017.
P. Choi, Radhakrishna, U., Antoniadis, D., and Fitzgerald, E. A., “GaN device-circuit interaction on RF linear power amplifier designed using the MVSG compact model”, in 2017 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS), Miami, FL, 2017, pp. 1-4.
C. Richter et al., “Si doped hafnium oxide - A "fragile" ferroelectric system”, Adv. Electron. Mater., vol. 3. p. 1700131, 2017.
M. Koyama et al., “Hydrogen desorption and cracking associated with martensitic transformation in Fe-Cr-Ni-Based austenitic steels with different carbon contents”, International Journal of Hydrogen Energy, vol. 42. pp. 26423-26435, 2017.
K. H. Lee et al., “Integration of Si-CMOS and III-V materials through multi-wafer stacking”, in 2017 IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), Burlingame, CA, 2017, pp. 1-2.
S. A. Fortuna et al., “Large spontaneous emission rate enhancement in a nanoscale III-V LED coupled to an optical antenna”, in 2017 Fifth Berkeley Symposium on Energy Efficient Electronic Systems \& Steep Transistors Workshop (E3S), Berkeley, CA, 2017, pp. 1-3.
E. A. Olivetti, Ceder, G., Gaustad, G. G., and Fu, X., “Lithium-Ion Battery Supply Chain Considerations: Analysis of Potential Bottlenecks in Critical Metals”, Joule, vol. 1. pp. 229-243, 2017.
Y. -M. Chiang, Su, L., Pan, M. S., and Li, Z., “Lowering the Bar on Battery Cost”, Joule, vol. 1. pp. 212-219, 2017.
L. Porz et al., “Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes”, Advanced Energy Materials, vol. 7. p. 1701003, 2017.
M. Hassani-Gangaraj, Veysset, D., Nelson, K. A., and Schuh, C. A., “Melting Can Hinder Impact-Induced Adhesion”, Physical Review Letters, vol. 119. 2017.
P. H. Rekemeyer, Chuang, C. -H. M., Bawendi, M. G., and Gradecak, S., “Minority Carrier Transport in Lead Sulfide Quantum Dot Photovoltaics”, Nano Letters, vol. 17. pp. 6221-6227, 2017.
D. Kohen et al., “Preventing phase separation in MOCVD-grown InAlAs compositionally graded buffer on silicon substrate using InGaAs interlayers”, Journal of Crystal Growth, vol. 478. pp. 64-70, 2017.
C. A. Schuh, “RECIPIENTS OF THE 2016 ACTA STUDENT AWARDS”, Scripta Materialia, vol. 140. p. 87, 2017.