K. J. A. Ooi et al., “Pushing the limits of CMOS optical parametric amplifiers with USRN:Si7N3 above the two-photon absorption edge”, Nature Communications, vol. 8. p. 13878, 2017.
H. L. Tuller, “Solar to fuels conversion technologies: a perspective”, Materials for Renewable and Sustainable Energy, vol. 6. 2017.
B. Wang et al., “The integration of InGaP LEDs with CMOS on 200 mm silicon wafers”, San Francisco, California, United States, 2017, p. 101070Y.
R. Chen, Canales, A., and Anikeeva, P., “Neural recording and modulation technologies”, Nature Reviews Materials, vol. 2. 2017.
J. Fornell, Tuncer, N., and Schuh, C. A., “Orientation dependence in superelastic Cu-Al-Mn-Ni micropillars”, Journal of Alloys and Compounds, vol. 693. pp. 1205-1213, 2017.
R. A. Gallardo, Khanal, S., Vargas, J. M., Spinu, L., Ross, C. A., and Garcia, C., “Angular dependent FORC and FMR of exchange-biased NiFe multilayer films”, Journal of Physics D: Applied Physics, vol. 50. p. 075002, 2017.
N. M. Bardhan et al., “Enhanced Cell Capture on Functionalized Graphene Oxide Nanosheets through Oxygen Clustering”, ACS Nano, vol. 11. pp. 1548-1558, 2017.
M. S. Barbosa, Suman, P. H., Kim, J. J., Tuller, H. L., Varela, J. A., and Orlandi, M. O., “Gas sensor properties of Ag- and Pd-decorated SnO micro-disks to NO 2 , H 2 and CO: Catalyst enhanced sensor response and selectivity”, Sensors and Actuators B: Chemical, vol. 239. pp. 253-261, 2017.
S. Bao et al., “Germanium-on-insulator virtual substrate for InGaP epitaxy”, Materials Science in Semiconductor Processing, vol. 58. pp. 15-21, 2017.
E. Lage, Zhang, J., and Ross, C. A., “Head-to-Head Domain Wall Structures in Tapered Magnetic Strips”, IEEE Transactions on Magnetics, vol. 53. pp. 1-4, 2017.
W. Zheng, Cheng, Q., Wang, D., and Thompson, C. V., “High-performance solid-state on-chip supercapacitors based on Si nanowires coated with ruthenium oxide via atomic layer deposition”, Journal of Power Sources, vol. 341. pp. 1-10, 2017.
J. Zhang, Tasan, C. C., Lai, M. J., Dippel, A. -C., and Raabe, D., “Complexion-mediated martensitic phase transformation in Titanium”, Nature Communications, vol. 8. p. 14210, 2017.
C. S. Kim, Bishop, S. R., Perry, N. H., and Tuller, H. L., “Electro-chemo-mechanical studies of perovskite-structured mixed ionic-electronic conducting SrSn1-xFexO3-x/2+δpart I: Defect chemistry”, Journal of Electroceramics, vol. 38. pp. 74-80, 2017.
Q. Du et al., “Gamma radiation effects in amorphous silicon and silicon nitride photonic devices”, Optics Letters, vol. 42. p. 587, 2017.
T. Goto et al., “Magnetism and Faraday Rotation in Oxygen-Deficient Polycrystalline and Single-Crystal Iron-Substituted Strontium Titanate”, Physical Review Applied, vol. 7. 2017.
H. Tian, Kimerling, L. C., Michel, J., Li, G., and Zhang, L., “Multipath trapping dynamics of nanoparticles towards an integrated waveguide with a high index contrast”, San Francisco, California, United States, 2017, p. 100610P.
S. R. Cross and Schuh, C. A., “Modeling localized corrosion with an effective medium approximation”, Corrosion Science, vol. 116. pp. 53-65, 2017.
Z. Li, Tasan, C. C., Springer, H., Gault, B., and Raabe, D., “Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys”, Scientific Reports, vol. 7. p. 40704, 2017.
P. Ahvenainen, Dixon, P. G., Kallonen, A., Suhonen, H., Gibson, L. J., and Svedstrom, K., “Spatially-localized bench-top X-ray scattering reveals tissue-specific microfibril orientation in Moso bamboo”, Plant Methods, vol. 13. 2017.
N. Kanazawa et al., “The role of Snell’s law for a magnonic majority gate”, Scientific Reports, vol. 7. 2017.
T. Yoshimoto et al., “Thermally stable amorphous tantalum yttrium oxide with low IR absorption for magnetophotonic devices”, Scientific Reports, vol. 7. 2017.
B. Grena, Alayrac, J. -B., Levy, E., Stolyarov, A. M., Joannopoulos, J. D., and Fink, Y., “Thermally-drawn fibers with spatially-selective porous domains”, Nature Communications, vol. 8. 2017.
M. Huang, Tan, A. J., Mann, M., Bauer, U., Ouedraogo, R., and Beach, G. S. D., “Three-terminal resistive switch based on metal/metal oxide redox reactions”, Scientific Reports, vol. 7. 2017.
L. Hong et al., “Two-dimensional lithium diffusion behavior and probable hybrid phase transformation kinetics in olivine lithium iron phosphate”, Nature Communications, vol. 8. 2017.
C. A. Schuh, Hono, K., Wagner, W. R., Gault, B., D’Angelo, J., and Gray, G. T., “Paths to Open Access: an update from Acta Materialia, Inc.”, Scripta Materialia, vol. 141. pp. 144-145, 2017.
G. G. D. Han et al., “Photoluminescent Arrays of Nanopatterned Monolayer MoS $_\textrm2$”, Advanced Functional Materials, vol. 27. p. 1703688, 2017.
X. Shen, Chen, T., Bishop, S. R., Perry, N. H., Tuller, H. L., and Sasaki, K., “Redox cycling induced Ni exsolution in Gd 0.1 Ce 0.8 Ni 0.1 O 2 - (Sr 0.9 La 0.1 ) 0.9 Ti 0.9 Ni 0.1 O 3 composite solid oxide fuel cell anodes”, Journal of Power Sources, vol. 370. pp. 122-130, 2017.
A. U. Regitsky, Keshavarz, B., McKinley, G. H., and Holten-Andersen, N., “Rheology as a Mechanoscopic Method to Monitor Mineralization in Hydrogels”, Biomacromolecules, vol. 18. pp. 4067-4074, 2017.
J. Wang et al., “Robust generation of frequency combs in a microresonator with strong and narrowband loss”, Photonics Research, vol. 5. p. 552, 2017.
H. Lin et al., “Chalcogenide glass-on-graphene photonics”, Nature Photonics, vol. 11. pp. 798-805, 2017.
F. Chen et al., “Solid polymer electrolytes incorporating cubic Li7La3Zr2O12 for all-solid-state lithium rechargeable batteries”, Electrochimica Acta, vol. 258. pp. 1106-1114, 2017.
B. Wang et al., “Control wafer bow of InGaP on 200 mm Si by strain engineering”, Semiconductor Science and Technology, vol. 32. p. 125013, 2017.
J. H. Dycus and LeBeau, J. M., “A reliable approach to prepare brittle semiconducting materials for cross-sectional transmission electron microscopy”, Journal of Microscopy, vol. 268. pp. 225-229, 2017.
X. Zhao, Heidelberger, C., Fitzgerald, E. A., Lu, W., Vardi, A., and del Alamo, J. A., “Sub-10 nm diameter InGaAs vertical nanowire MOSFETs”, in 2017 IEEE International Electron Devices Meeting (IEDM), San Francisco, CA, USA, 2017, pp. 1-17.
J. Zhang, Raabe, D., and Tasan, C. C., “Designing duplex, ultrafine-grained Fe-Mn-Al-C steels by tuning phase transformation and recrystallization kinetics”, Acta Materialia, vol. 141. pp. 374-387, 2017.
M. Ouk and Beach, G. S. D., “Superparamagnetic microbead transport induced by a magnetic field on large-area magnetic antidot arrays”, Journal of Magnetism and Magnetic Materials, vol. 444. pp. 218-226, 2017.
J. H. Dycus and LeBeau, J. M., “A reliable approach to prepare brittle semiconducting materials for cross-sectional transmission electron microscopy”, J. Microsc., vol. 268. pp. 225-229, 2017.
N. M. Schneider, Park, J. H., Grogan, J. M., Steingart, D. A., Bau, H. H., and Ross, F. M., “Nanoscale evolution of interface morphology during electrodeposition”, NATURE COMMUNICATIONS, vol. 8. 2017.
X. Zeng, Du, Z., Schuh, C. A., and Gan, C. L., “Enhanced shape memory and superelasticity in small-volume ceramics: a perspective on the controlling factors”, MRS Communications, vol. 7. pp. 747-754, 2017.
E. Kim, Huang, K., Jegelka, S., and Olivetti, E., “Virtual screening of inorganic materials synthesis parameters with deep learning”, npj Computational Materials, vol. 3. 2017.
B. S. Chapman, Wu, W. -C., Li, Q., Holten-Andersen, N., and Tracy, J. B., “Heteroaggregation Approach for Depositing Magnetite Nanoparticles onto Silica-Overcoated Gold Nanorods”, Chemistry of Materials, vol. 29. pp. 10362-10368, 2017.
S. Yadav et al., “High mobility In0.30Ga0.70As MOSHEMTs on low threading dislocation density 200 mm Si substrates: A technology enabler towards heterogeneous integration of low noise and medium power amplifiers with Si CMOS”, in 2017 IEEE International Electron Devices Meeting (IEDM), San Francisco, CA, USA, 2017, pp. 1-17.
M. J. Ignatowich et al., “Impact of enhanced oxide reducibility on rates of solar-driven thermochemical fuel production”, MRS Communications, vol. 7. pp. 873-878, 2017.
E. Rapoport and Beach, G. S. D., “Architecture for Directed Transport of Superparamagnetic Microbeads in a Magnetic Domain Wall Routing Network”, Scientific Reports, vol. 7. 2017.
J. L. M. Rupp, Valov, I., and Ielmini, D., “Editorial for the JECR special issue on resistive switching: Oxide materials, mechanisms, and devices”, Journal of Electroceramics, vol. 39. pp. 1-3, 2017.
T. Khudiyev et al., “Electrostrictive microelectromechanical fibres and textiles”, Nature Communications, vol. 8. 2017.
K. C. Spencer, Sy, J. C., Ramadi, K. B., Graybiel, A. M., Langer, R., and Cima, M. J., “Erratum: Characterization of Mechanically Matched Hydrogel Coatings to Improve the Biocompatibility of Neural Implants”, Scientific Reports, vol. 7. 2017.
C. Stinn, Nose, K., Okabe, T., and Allanore, A., “Experimentally Determined Phase Diagram for the Barium Sulfide-Copper(I) Sulfide System Above 873 K (600 °C)”, Metallurgical and Materials Transactions B, vol. 48. pp. 2922-2929, 2017.
Z. Li, Tasan, C. C., Springer, H., Gault, B., and Raabe, D., “Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys”, Scientific Reports, vol. 7. 2017.
H. N. Schwerdt et al., “Long-term dopamine neurochemical monitoring in primates”, Proceedings of the National Academy of Sciences, vol. 114. pp. 13260-13265, 2017.