Publications

2019

Y. Shi et al., “Zigzag or spiral-shaped nanostructures improve mechanical stability in yttria-stabilized zirconia membranes for micro-energy conversion devices”, Nano Energy, vol. 59. pp. 674-682, 2019.
R. Pfenninger, Struzik, M., Garbayo, I., Stilp, E., and Rupp, J. L. M., “A low ride on processing temperature for fast lithium conduction in garnet solid-state battery films”, Nature Energy, vol. 4. pp. 475-483, 2019.
R. H. Gilmore et al., “Epitaxial Dimers and Auger-Assisted Detrapping in PbS Quantum Dot Solids”, Matter, vol. 1. pp. 250-265, 2019.
H. Dycus et al., “The role of transient surface morphology on composition control in AlGaN layers and wells”, Appl. Phys. Lett., vol. 114. p. 031602, 2019.
Y. Ansari, Zhang, S., Wen, B., Fan, F., and Chiang, Y. -M., “Stabilizing Li-S Battery Through Multilayer Encapsulation of Sulfur”, Advanced Energy Materials, vol. 9. p. 1802213, 2019.
L. Li, Erb, R. M., Wang, J., Wang, J., and Chiang, Y. -M., “Fabrication of Low-Tortuosity Ultrahigh-Area-Capacity Battery Electrodes through Magnetic Alignment of Emulsion-Based Slurries”, Advanced Energy Materials, vol. 9. p. 1802472, 2019.
T. Swamy, Chen, X., and Chiang, Y. -M., “Electrochemical Redox Behavior of Li Ion Conducting Sulfide Solid Electrolytes”, Chemistry of Materials, vol. 31. pp. 707-713, 2019.
J. D. Benck, Rettenwander, D., Jackson, A., Young, D., and Chiang, Y. -M., “Apparatus for operando x-ray diffraction of fuel electrodes in high temperature solid oxide electrochemical cells”, Review of Scientific Instruments, vol. 90. p. 023910, 2019.
I. -Y. L. Hsieh, Pan, M. S., Chiang, Y. -M., and Green, W. H., “Learning only buys you so much: Practical limits on battery price reduction”, Applied Energy, vol. 239. pp. 218-224, 2019.
S. Imbriglio et al., “Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study”, Surface and Coatings Technology. Elsevier, 2019.
E. Sediva, Defferriere, T., Perry, N. H., Tuller, H. L., and Rupp, J. L. M., “In Situ Method Correlating Raman Vibrational Characteristics to Chemical Expansion via Oxygen Nonstoichiometry of Perovskite Thin Films”, Advanced Materials, vol. in press. 2019.
A. J. Carrillo, Bork, A. H., Moser, T., Sediva, E., Hood, Z. D., and Rupp, J. L. M., “Modifying La0.6Sr0.4MnO3 Perovskites with Cr Incorporation for Fast Isothermal CO2-Splitting Kinetics in Solar-Driven Thermochemical Cycles”, Advanced Energy Materials, vol. in press. 2019.
D. Pham, Dycus, J. H., LeBeau, J. M., Manga, V. R., Muralidharan, K., and Corral, E. L., “Thermochemical model on the carbothermal reduction of oxides during spark plasma sintering of zirconium diboride”, J. Am. Ceram. Soc., vol. 102. pp. 757–767, 2019.

2018

U. Kilic, Ross, C. A., and Garcia, C., “Tailoring the Asymmetric Magnetoimpedance Response in Exchange-Biased Ni - Fe Multilayers”, Physical Review Applied, vol. 10. 2018.
S. A. Fortuna, Heidelberger, C., Yablonovitch, E., Fitzgerald, E. A., and Wu, M. C., “Nanoscale III-V Light Emitting Diode with Antenna-Enhanced 250 Picosecond Spontaneous Emission Lifetime”, in 2018 IEEE International Semiconductor Laser Conference (ISLC), Santa Fe, NM, 2018, pp. 1-2.
K. Graetz, Paras, J. S., and Schuh, C. A., “Nanostructure stability and nano-phase separation sintering in the titanium–magnesium system”, Materialia, vol. 1. pp. 89-98, 2018.
I. Lemesh and Beach, G. S. D., “Twisted domain walls and skyrmions in perpendicularly magnetized multilayers”, Physical Review B, vol. 98. 2018.
R. Amin, Delattre, B., Tomsia, A. P., and Chiang, Y. -M., “Electrochemical Characterization of High Energy Density Graphite Electrodes Made by Freeze-Casting”, ACS Applied Energy Materials, vol. 1. pp. 4976-4981, 2018.
G. Vardar et al., “Structure, Chemistry, and Charge Transfer Resistance of the Interface between Li7 La3 Zr2 O12 Electrolyte and LiCoO2 Cathode”, Chemistry of Materials, vol. 30. pp. 6259-6276, 2018.
X. Zhao, Heidelberger, C., Fitzgerald, E. A., Lu, W., Vardi, A., and del Alamo, J. A., “Sub-10-nm-Diameter InGaAs Vertical Nanowire MOSFETs: Ni Versus Mo Contacts”, IEEE Transactions on Electron Devices, vol. 65. pp. 3762-3768, 2018.
K. J. Huang, Li, L., and Olivetti, E. A., “Designing for Manufacturing Scalability in Clean Energy Research”, Joule, vol. 2. pp. 1642-1647, 2018.
D. Perego, Heng, J. S. T., Wang, X., Shao-Horn, Y., and Thompson, C. V., “High-performance polycrystalline RuOx cathodes for thin film Li-ion batteries”, Electrochimica Acta, vol. 283. pp. 228-233, 2018.
M. A. Gibson et al., “3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses”, Materials Today, vol. 21. pp. 697-702, 2018.
W. A. Sasangka, Gao, Y., Gan, C. L., and Thompson, C. V., “Impact of carbon impurities on the initial leakage current of AlGaN/GaN high electron mobility transistors”, Microelectronics Reliability, vol. 88-90. pp. 393-396, 2018.
C. A. Schuh, Hono, K., Wagner, W. R., Gault, B., Angelo, J. D., and Gray, G. T., “Launching Materialia”, Scripta Materialia, vol. 154. pp. 241-242, 2018.
E. R. Rosenberg et al., “Magnetism and spin transport in rare-earth-rich epitaxial terbium and europium iron garnet films”, Physical Review Materials, vol. 2. 2018.
P. A. Linford, Xu, L., Huang, B., Shao-Horn, Y., and Thompson, C. V., “Multi-cell thermogalvanic systems for harvesting energy from cyclic temperature changes”, Journal of Power Sources, vol. 399. pp. 429-435, 2018.
A. Kilias, Canales, A., Froriep, U. P., Park, S., Egert, U., and Anikeeva, P., “Optogenetic entrainment of neural oscillations with hybrid fiber probes”, Journal of Neural Engineering, vol. 15. p. 056006, 2018.
Y. Wang et al., “Performance of AlGaInP LEDs on silicon substrates through low threading dislocation density (TDD) germanium buffer layer”, Semiconductor Science and Technology, vol. 33. p. 104004, 2018.
M. Hassani-Gangaraj, Veysset, D., Champagne, V. K., Nelson, K. A., and Schuh, C. A., “Adiabatic shear instability is not necessary for adhesion in cold spray”, Acta Materialia, vol. 158. pp. 430-439, 2018.
G. Bucci, Talamini, B., Balakrishna, A. R., Chiang, Y. -M., and Carter, C., “Mechanical instability of electrode-electrolyte interfaces in solid-state batteries”, Physical Review Materials, vol. 2. 2018.
M. R. Hauwiller et al., “Dynamics of Nanoscale Dendrite Formation in Solution Growth Revealed Through in Situ Liquid Cell Electron Microscopy”, NANO LETTERS, vol. 18. pp. 6427-6433, 2018.
D. C. Marchese, Bates, M. E., Keisler, J. M., Alcaraz, M. L., Linkov, I., and Olivetti, E. A., “Value of information analysis for life cycle assessment: Uncertain emissions in the green manufacturing of electronic tablets”, Journal of Cleaner Production, vol. 197. pp. 1540-1545, 2018.
Z. H. Lim et al., “Charge transfer and tunable built-in electric fields across semiconductor-crystalline oxide interfaces”, arXiv. 2018.
D. Veysset et al., “High-velocity micro-particle impact on gelatin and synthetic hydrogel”, Journal of the Mechanical Behavior of Biomedical Materials, vol. 86. pp. 71-76, 2018.
A. Kadir et al., “Influence of substrate nitridation on the threading dislocation density of GaN grown on 200 mm Si (111) substrate”, Thin Solid Films, vol. 663. pp. 73-78, 2018.
D. Amram and Schuh, C. A., “Higher Temperatures Yield Smaller Grains in a Thermally Stable Phase-Transforming Nanocrystalline Alloy”, Physical Review Letters, vol. 121. 2018.
S. Wei, He, F., and Tasan, C. C., “Metastability in high-entropy alloys: A review”, Journal of Materials Research, vol. 33. pp. 2924-2937, 2018.
M. Struzik, Garbayo, I., Pfenninger, R., and Rupp, J. L. M., “A Simple and Fast Electrochemical CO2 Sensor Based on Li7La3Zr2O12 for Environmental Monitoring”, Advanced Materials, vol. 30. p. 1804098, 2018.
W. Kong et al., “Polarity governs atomic interaction through two-dimensional materials”, Nature Materials, vol. 17. pp. 999-1004, 2018.
G. H. Ryu, France-Lanord, A., Wen, Y., Zhou, S., Grossman, J. C., and Warner, J. H., “Atomic Structure and Dynamics of Self-Limiting Sub-Nanometer Pores in Monolayer W2”, ACS Nano, vol. 12. pp. 11638-11647, 2018.
L. He et al., “Broadband athermal waveguides and resonators for datacom and telecom applications”, Photonics Research, vol. 6. p. 987, 2018.
M. L. Alcaraz, Noshadravan, A., Zgola, M., Kirchain, R. E., and Olivetti, E. A., “Streamlined life cycle assessment: A case study on tablets and integrated circuits”, Journal of Cleaner Production, vol. 200. pp. 819-826, 2018.
P. M. Vereecken, Radisic, A., and Ross, F. M., “Differential Inhibition during Cu Electrodeposition on Ru: Combined Electrochemical and Real-Time TEM Studies”, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, vol. 166. p. D3129—D3135, 2018.
C. Zhang et al., “Thermal conductivity in self-assembled CoFe $_\textrm2$ O $_\textrm4$ /BiFeO $_\textrm3$ vertical nanocomposite films”, Applied Physics Letters, vol. 113. p. 223105, 2018.
E. Fernandez, Tu, K. -H., Ho, P., and Ross, C. A., “Thermal stability of L1 $_\textrm0$ -FePt nanodots patterned by self-assembled block copolymer lithography”, Nanotechnology, vol. 29. p. 465301, 2018.
T. Xie and Grossman, J. C., “Hierarchical visualization of materials space with graph convolutional neural networks”, The Journal of Chemical Physics, vol. 149. p. 174111, 2018.
Y. Wang et al., “In0.49Ga0.51P/GaAs heterojunction bipolar transistors (HBTs) on 200 mm Si substrates: Effects of base thickness, base and sub-collector doping concentrations”, AIP Advances, vol. 8. p. 115132, 2018.
E. Sediva, Bowman, W. J., Gonzalez-Rosillo, J. C., and Rupp, J. L. M., “Investigation of the Eightwise Switching Mechanism and Its Suppression in SrTiO3 Modulated by Humidity and Interchanged Top and Bottom Platinum and LaNiO3 Electrode Contacts”, Advanced Electronic Materials. p. 1800566, 2018.
W. K. Loke, Lee, K. H., Wang, Y., Tan, C. S., Fitzgerald, E. A., and Yoon, S. F., “MOCVD growth of InGaP/GaAs heterojunction bipolar transistors on 200 mm Si wafers for heterogeneous integration with Si CMOS”, Semiconductor Science and Technology, vol. 33. p. 115011, 2018.