Y. Shi et al., “Zigzag or spiral-shaped nanostructures improve mechanical stability in yttria-stabilized zirconia membranes for micro-energy conversion devices”, Nano Energy, vol. 59. pp. 674-682, 2019.
R. Pfenninger, Struzik, M., Garbayo, I., Stilp, E., and Rupp, J. L. M., “A low ride on processing temperature for fast lithium conduction in garnet solid-state battery films”, Nature Energy, vol. 4. pp. 475-483, 2019.
R. H. Gilmore et al., “Epitaxial Dimers and Auger-Assisted Detrapping in PbS Quantum Dot Solids”, Matter, vol. 1. pp. 250-265, 2019.
H. Dycus et al., “The role of transient surface morphology on composition control in AlGaN layers and wells”, Appl. Phys. Lett., vol. 114. p. 031602, 2019.
Y. Ansari, Zhang, S., Wen, B., Fan, F., and Chiang, Y. -M., “Stabilizing Li-S Battery Through Multilayer Encapsulation of Sulfur”, Advanced Energy Materials, vol. 9. p. 1802213, 2019.
L. Li, Erb, R. M., Wang, J., Wang, J., and Chiang, Y. -M., “Fabrication of Low-Tortuosity Ultrahigh-Area-Capacity Battery Electrodes through Magnetic Alignment of Emulsion-Based Slurries”, Advanced Energy Materials, vol. 9. p. 1802472, 2019.
T. Swamy, Chen, X., and Chiang, Y. -M., “Electrochemical Redox Behavior of Li Ion Conducting Sulfide Solid Electrolytes”, Chemistry of Materials, vol. 31. pp. 707-713, 2019.
J. D. Benck, Rettenwander, D., Jackson, A., Young, D., and Chiang, Y. -M., “Apparatus for operando x-ray diffraction of fuel electrodes in high temperature solid oxide electrochemical cells”, Review of Scientific Instruments, vol. 90. p. 023910, 2019.
I. -Y. L. Hsieh, Pan, M. S., Chiang, Y. -M., and Green, W. H., “Learning only buys you so much: Practical limits on battery price reduction”, Applied Energy, vol. 239. pp. 218-224, 2019.
S. Imbriglio et al., “Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study”, Surface and Coatings Technology. Elsevier, 2019.
E. Sediva, Defferriere, T., Perry, N. H., Tuller, H. L., and Rupp, J. L. M., “In Situ Method Correlating Raman Vibrational Characteristics to Chemical Expansion via Oxygen Nonstoichiometry of Perovskite Thin Films”, Advanced Materials, vol. in press. 2019.
A. J. Carrillo, Bork, A. H., Moser, T., Sediva, E., Hood, Z. D., and Rupp, J. L. M., “Modifying La0.6Sr0.4MnO3 Perovskites with Cr Incorporation for Fast Isothermal CO2-Splitting Kinetics in Solar-Driven Thermochemical Cycles”, Advanced Energy Materials, vol. in press. 2019.
J. A. Frank, Antonini, M. -J., and Anikeeva, P. O., “Next-generation interfaces for studying neural function”, Nature Biotechnology. Springer Science and Business Media LLC, 2019.
Y. Ding, Gadelrab, K. R., Rodriguez, K. M., Huang, H., Ross, C. A., and Alexander-Katz, A., “Emergent symmetries in block copolymer epitaxy”, Nature Communications, vol. 10, no. 1. Springer Science and Business Media LLC, 2019.
C. -W. Lin et al., “Creating fluorescent quantum defects in carbon nanotubes using hypochlorite and light”, Nature Communications, vol. 10, no. 1. Springer Science and Business Media LLC, 2019.
L. Ceppi et al., “Real-Time Single-Walled Carbon Nanotube-Based Fluorescence Imaging Improves Survival after Debulking Surgery in an Ovarian Cancer Model”, ACS Nano, vol. 13, no. 5. American Chemical Society (ACS), pp. 5356-5365, 2019.
N. Weber et al., “Modeling discontinuous potential distributions using the finite volume method, and application to liquid metal batteries”, Electrochimica Acta, vol. 318. Elsevier BV, pp. 857-864, 2019.
S. Rao et al., “Remotely controlled chemomagnetic modulation of targeted neural circuits”, Nature Nanotechnology. Springer Science and Business Media LLC, 2019.
B. C. Cameron and Tasan, C. C., “Microstructural damage sensitivity prediction using spatial statistics”, Scientific Reports, vol. 9, no. 1. Springer Nature, 2019.
D. Ciceri and Allanore, A., “Local fertilizers to achieve food self-sufficiency in Africa”, Science of The Total Environment, vol. 648. Elsevier BV, pp. 669-680, 2019.
J. M. Kubiak and Macfarlane, R. J., “Forming Covalent Crosslinks between Polymer‐Grafted Nanoparticles as a Route to Highly Filled and Mechanically Robust Nanocomposites”, Advanced Functional Materials. Wiley, p. 1905168, 2019.
P. A. Gabrys, Zornberg, L. Z., and Macfarlane, R. J., “Programmable Atom Equivalents: Atomic Crystallization as a Framework for Synthesizing Nanoparticle Superlattices”, Small, vol. 15, no. 26. p. 1805424, 2019.
Q. Zhu, Van Vliet, K. J., Holten-Andersen, N., and Miserez, A., “A Double‐Layer Mechanochromic Hydrogel with Multidirectional Force Sensing and Encryption Capability”, Advanced Functional Materials, vol. 29, no. 14. Wiley, p. 1808191, 2019.
J. F. Ohmura et al., “Highly adjustable 3D nano-architectures and chemistries via assembled 1D biological templates”, Nanoscale, vol. 11, no. 3. Royal Society of Chemistry (RSC), pp. 1091-1102, 2019.
P. J. Santos, Cao, Z., Zhang, J., Alexander-Katz, A., and Macfarlane, R. J., “Dictating Nanoparticle Assembly via Systems-Level Control of Molecular Multivalency”, Journal of the American Chemical Society. American Chemical Society (ACS), 2019.
P. J. Santos, Cheung, T. C., and Macfarlane, R. J., “Assembling Ordered Crystals with Disperse Building Blocks”, Nano Letters, vol. 19, no. 8. American Chemical Society (ACS), pp. 5774-5780, 2019.
M. Ferrara, Chiang, Y. -M., and Deutch, J. M., “Demonstrating Near-Carbon-Free Electricity Generation from Renewables and Storage”, Joule. Elsevier BV, 2019.
L. D. Ellis, Badel, A. F., Chiang, M. L., Park, R. J. -Y., and Chiang, Y. -M., “Toward electrochemical synthesis of cement—An electrolyzer-based process for decarbonating CaCO3 while producing useful gas streams”, Proceedings of the National Academy of Sciences. Proceedings of the National Academy of Sciences, p. 201821673, 2019.
D. Pham, Dycus, J. H., LeBeau, J. M., Manga, V. R., Muralidharan, K., and Corral, E. L., “Thermochemical model on the carbothermal reduction of oxides during spark plasma sintering of zirconium diboride”, J. Am. Ceram. Soc., vol. 102. pp. 757–767, 2019.


U. Kilic, Ross, C. A., and Garcia, C., “Tailoring the Asymmetric Magnetoimpedance Response in Exchange-Biased Ni - Fe Multilayers”, Physical Review Applied, vol. 10. 2018.
S. A. Fortuna, Heidelberger, C., Yablonovitch, E., Fitzgerald, E. A., and Wu, M. C., “Nanoscale III-V Light Emitting Diode with Antenna-Enhanced 250 Picosecond Spontaneous Emission Lifetime”, in 2018 IEEE International Semiconductor Laser Conference (ISLC), Santa Fe, NM, 2018, pp. 1-2.
K. Graetz, Paras, J. S., and Schuh, C. A., “Nanostructure stability and nano-phase separation sintering in the titanium–magnesium system”, Materialia, vol. 1. pp. 89-98, 2018.
I. Lemesh and Beach, G. S. D., “Twisted domain walls and skyrmions in perpendicularly magnetized multilayers”, Physical Review B, vol. 98. 2018.
R. Amin, Delattre, B., Tomsia, A. P., and Chiang, Y. -M., “Electrochemical Characterization of High Energy Density Graphite Electrodes Made by Freeze-Casting”, ACS Applied Energy Materials, vol. 1. pp. 4976-4981, 2018.
G. Vardar et al., “Structure, Chemistry, and Charge Transfer Resistance of the Interface between Li7 La3 Zr2 O12 Electrolyte and LiCoO2 Cathode”, Chemistry of Materials, vol. 30. pp. 6259-6276, 2018.
X. Zhao, Heidelberger, C., Fitzgerald, E. A., Lu, W., Vardi, A., and del Alamo, J. A., “Sub-10-nm-Diameter InGaAs Vertical Nanowire MOSFETs: Ni Versus Mo Contacts”, IEEE Transactions on Electron Devices, vol. 65. pp. 3762-3768, 2018.
K. J. Huang, Li, L., and Olivetti, E. A., “Designing for Manufacturing Scalability in Clean Energy Research”, Joule, vol. 2. pp. 1642-1647, 2018.
D. Perego, Heng, J. S. T., Wang, X., Shao-Horn, Y., and Thompson, C. V., “High-performance polycrystalline RuOx cathodes for thin film Li-ion batteries”, Electrochimica Acta, vol. 283. pp. 228-233, 2018.
M. A. Gibson et al., “3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses”, Materials Today, vol. 21. pp. 697-702, 2018.
W. A. Sasangka, Gao, Y., Gan, C. L., and Thompson, C. V., “Impact of carbon impurities on the initial leakage current of AlGaN/GaN high electron mobility transistors”, Microelectronics Reliability, vol. 88-90. pp. 393-396, 2018.
C. A. Schuh, Hono, K., Wagner, W. R., Gault, B., Angelo, J. D., and Gray, G. T., “Launching Materialia”, Scripta Materialia, vol. 154. pp. 241-242, 2018.
E. R. Rosenberg et al., “Magnetism and spin transport in rare-earth-rich epitaxial terbium and europium iron garnet films”, Physical Review Materials, vol. 2. 2018.
P. A. Linford, Xu, L., Huang, B., Shao-Horn, Y., and Thompson, C. V., “Multi-cell thermogalvanic systems for harvesting energy from cyclic temperature changes”, Journal of Power Sources, vol. 399. pp. 429-435, 2018.
A. Kilias, Canales, A., Froriep, U. P., Park, S., Egert, U., and Anikeeva, P. O., “Optogenetic entrainment of neural oscillations with hybrid fiber probes”, Journal of Neural Engineering, vol. 15. p. 056006, 2018.
Y. Wang et al., “Performance of AlGaInP LEDs on silicon substrates through low threading dislocation density (TDD) germanium buffer layer”, Semiconductor Science and Technology, vol. 33. p. 104004, 2018.
M. Hassani-Gangaraj, Veysset, D., Champagne, V. K., Nelson, K. A., and Schuh, C. A., “Adiabatic shear instability is not necessary for adhesion in cold spray”, Acta Materialia, vol. 158. pp. 430-439, 2018.
G. Bucci, Talamini, B., Balakrishna, A. R., Chiang, Y. -M., and Carter, C., “Mechanical instability of electrode-electrolyte interfaces in solid-state batteries”, Physical Review Materials, vol. 2. 2018.
M. R. Hauwiller et al., “Dynamics of Nanoscale Dendrite Formation in Solution Growth Revealed Through in Situ Liquid Cell Electron Microscopy”, NANO LETTERS, vol. 18. pp. 6427-6433, 2018.
D. C. Marchese, Bates, M. E., Keisler, J. M., Alcaraz, M. L., Linkov, I., and Olivetti, E. A., “Value of information analysis for life cycle assessment: Uncertain emissions in the green manufacturing of electronic tablets”, Journal of Cleaner Production, vol. 197. pp. 1540-1545, 2018.
Z. H. Lim et al., “Charge transfer and tunable built-in electric fields across semiconductor-crystalline oxide interfaces”, arXiv. 2018.