Michael J. Cima

  • David H. Koch Professor of Engineering
  • Associate Dean of Innovation for the School of Engineering
  • Co-Director of the MIT Innovation Initiative
  • Faculty Director, Lemelson-MIT Program
  • BS Chemistry, University of California at Berkeley, 1982
  • PhD Chemical Engineering, University of California at Berkeley, 1986

Ceramics; Cancer; Implants; Nanotechnology

Michael J. Cima

Research

Prof. Cima is author or co-author of over two hundred peer-reviewed scientific publications and forty-five patents, and is a recognized expert in the field of materials processing. Prof. Cima is actively involved in materials and engineered systems aimed at improving human health such as treatments for cancer, metabolic diseases, trauma, and urological disorders. Prof. Cima's research includes advanced forming technologies for complex macro and micro devices, such as colloid science, MEMS and other micro components for medical devices that are used for drug delivery and diagnostics, as well as high-throughput development methods for formulations of materials and pharmaceutical formulations. He is a coinventor of MIT's three-dimensional printing process. His research has led to the development of chemically derived epitaxial oxide films for HTSC coated conductors. He and collaborators are developing implantable MEMS devices for unprecedented control in the delivery of pharmaceuticals and implantable diagnostic systems.

Recent News

Cima part of team that developed new, more accurate neural implants

New technologies such as optogenetics have allowed us to identify similar microstructures in the brain. However, these techniques rely on liquid infusions into the brain, which prepare the regions to be studied to respond to light. These infusions are done with large needles, which do not have…   more

New Neural Implants developed by Prof. Cima

New technologies such as optogenetics have allowed us to identify similar microstructures in the brain. However, these techniques rely on liquid infusions into the brain, which prepare the regions to be studied to respond to light. These infusions are done with large needles, which do not have…   more

Cima takes on new role to promote innovation

Michael J. Cima has been named co-director of the MIT Innovation Initiative and associate dean of innovation for the School of Engineering. Cima, the David H. Koch Professor of Engineering, will begin his new roles on March 1. He will also continue as faculty director of the Lemelson-MIT…   more

Ultrathin needle can deliver drugs directly to the brain

MIT researchers have devised a miniaturized system that can deliver tiny quantities of medicine to brain regions as small as 1 cubic millimeter. This type of targeted dosing could make it possible to treat diseases that affect very specific brain circuits, without interfering with the normal…   more

Deshpande Center and J-WAFS announce fall 2017 research grants

The MIT Deshpande Center for Technological Innovation announced today the award of $768,000 in grants to 17 MIT research teams currently working on early-stage technologies. DMSE-related projects include: "Structured Nucleic Acid Nanoparticle Therapeutic Delivery Platform" — Mark Bathe,…   more

Study offers guidance for targeting residual ovarian tumors

A new study conducted by Michael Cima explores ways to improve chemotherapy strategies for ovarian cancer, and how to determine which patients would be most likely to benefit from a new implantable device that could make intraperitoneal chemotherapy more bearable. "Most women diagnosed…   more

Making brain implants smaller could prolong their lifespan

Michael Cima has a new paper on brain implants and gliosis, which is scarring produced by the implant. This kind of implant is used for deep brain stimulation to treat Parkinson’s disease, among other uses, but about half of them fail within six months due to gliosis. The new study found…   more

Publications

2018

A. Bashyam, Li, M., and Cima, M. J., “Design and experimental validation of Unilateral Linear Halbach magnet arrays for single-sided magnetic resonance”, Journal of Magnetic Resonance, vol. 292. pp. 36-43, 2018.
K. B. Ramadi et al., “Focal, remote-controlled, chronic chemical modulation of brain microstructures”, Proceedings of the National Academy of Sciences, vol. 115. pp. 7254-7259, 2018.
C. Dagdeviren et al., “Miniaturized neural system for chronic, local intracerebral drug delivery”, Science Translational Medicine, vol. 10. p. eaan2742, 2018.
H. Ragelle et al., “Surface tension-assisted additive manufacturing”, Nature Communications, vol. 9. 2018.
O. Jonas et al., “In vivo detection of drug-induced apoptosis in tumors using Raman spectroscopy”, The Analyst, vol. 143. pp. 4836-4839, 2018.

2017

Y. Zwang et al., “Synergistic interactions with PI3K inhibition that induce apoptosis”, eLife, vol. 6. 2017.
L. M. Tanenbaum, Mantzavinou, A., Subramanyam, K. S., del Carmen, M. G., and Cima, M. J., “Ovarian cancer spheroid shrinkage following continuous exposure to cisplatin is a function of spheroid diameter”, Gynecologic Oncology, vol. 146. pp. 161-169, 2017.
H. N. Schwerdt et al., “Subcellular electrode arrays for multisite recording of dopamine in vivo”, in 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, 2017, pp. 549-552.
K. C. Spencer, Sy, J. C., Ramadi, K. B., Graybiel, A. M., Langer, R., and Cima, M. J., “Erratum: Characterization of Mechanically Matched Hydrogel Coatings to Improve the Biocompatibility of Neural Implants”, Scientific Reports, vol. 7. 2017.
H. N. Schwerdt et al., “Long-term dopamine neurochemical monitoring in primates”, Proceedings of the National Academy of Sciences, vol. 114. pp. 13260-13265, 2017.
L. M. Tanenbaum, Mantzavinou, A., Subramanyam, K. S., del Carmen, M. G., and Cima, M. J., “Ovarian cancer spheroid shrinkage following continuous exposure to cisplatin is a function of spheroid diameter”, Gynecologic Oncology, vol. 146. pp. 161-169, 2017.
K. C. Spencer, Sy, J. C., Ramadi, K. B., Graybiel, A. M., Langer, R., and Cima, M. J., “Characterization of Mechanically Matched Hydrogel Coatings to Improve the Biocompatibility of Neural Implants”, Scientific Reports, vol. 7. p. 1952, 2017.
H. N. Schwerdt et al., “Subcellular probes for neurochemical recording from multiple brain sites”, Lab on a Chip, vol. 17. pp. 1104-1115, 2017.
K. C. Spencer, Sy, J. C., Falcon-Banchs, R., and Cima, M. J., “A three dimensional in vitro glial scar model to investigate the local strain effects from micromotion around neural implants”, Lab on a Chip, vol. 17. pp. 795-804, 2017.
S. M. Davidson et al., “Direct evidence for cancer-cell-autonomous extracellular protein catabolism in pancreatic tumors”, Nature Medicine, vol. 23. pp. 235-241, 2017.
H. N. Schwerdt et al., “Subcellular Electrode Arrays for Multisite Recording of Dopamine in Vivo”, in 30th Ieee International Conference on Micro Electro Mechanical Systems (mems 2017), New York: Ieee, 2017, pp. 549-552.
H. N. Schwerdt et al., “Subcellular probes for neurochemical recording from multiple brain sites”, Lab on a Chip, vol. 17. pp. 1104-1115, 2017.
Y. E. Cherner, Kuklja, M. M., Cima, M. J., Rusakov, A. I., Sigov, A. S., and Settens, C., “The Use of Web-based Virtual X-Ray Diffraction Laboratory for Teaching Materials Science and Engineering”, MRS Advances, vol. 2. pp. 1687-1692, 2017.

2016

O. Jonas et al., “Parallel In Vivo Assessment of Drug Phenotypes at Various Time Points during Systemic BRAF Inhibition Reveals Tumor Adaptation and Altered Treatment Vulnerabilities”, Clinical Cancer Research, vol. 22. pp. 6031-6038, 2016.
A. L. Hong et al., “Integrated genetic and pharmacologic interrogation of rare cancers”, Nature Communications, vol. 7. p. 11987, 2016.
M. J. Oudin et al., “Tumor Cell-Driven Extracellular Matrix Remodeling Drives Haptotaxis during Metastatic Progression”, Cancer Discovery, vol. 6. pp. 516-531, 2016.

2015

H. Ye et al., “Sustained, low-dose intraperitoneal cisplatin improves treatment outcome in ovarian cancer mouse models”, Journal of Controlled Release, vol. 220. pp. 358-367, 2015.
Q. Ong, Hochberg, F. H., and Cima, M. J., “Depot delivery of dexamethasone and cediranib for the treatment of brain tumor associated edema in an intracranial rat glioma model”, Journal of Controlled Release, vol. 217. pp. 183-190, 2015.
O. Jonas et al., “An implantable microdevice to perform high-throughput in vivo drug sensitivity testing in tumors”, Science Translational Medicine, vol. 7. p. 284ra57, 2015.
C. C. Vassiliou, Liu, V. H., and Cima, M. J., “Miniaturized, biopsy-implantable chemical sensor with wireless, magnetic resonance readout”, Lab on a Chip, vol. 15. pp. 3465-3472, 2015.
M. Li, Cima, M. J., and Milner, D. A., “If It's Not One Thing, It's Another: An Inverse Relationship of Malignancy and Atherosclerotic Disease”, Plos One, vol. 10. p. e0126855, 2015.

2014

U. M. Upadhyay et al., “Intracranial microcapsule chemotherapy delivery for the localized treatment of rodent metastatic breast adenocarcinoma in the brain”, Proceedings of the National Academy of Sciences of the United States of America, vol. 111. pp. 16071-16076, 2014.
M. J. Cima et al., “Single compartment drug delivery”, Journal of Controlled Release, vol. 190. pp. 157-171, 2014.
N. Tavassolian, Li, M., Vassiliou, C. C., and Cima, M. J., “A Novel Magnetic Relaxation-Based Platform for Hydration Monitoring”, Ieee Sensors Journal, vol. 14. 2014.
M. J. Cima, “Next-generation wearable electronics”, Nature Biotechnology, vol. 32. pp. 642-643, 2014.
V. H. Liu, Vassiliou, C. C., Imaad, S. M., and Cima, M. J., “Solid MRI contrast agents for long-term, quantitative in vivo oxygen sensing”, Proceedings of the National Academy of Sciences of the United States of America, vol. 111. pp. 6588-6593, 2014.
J. M. Milwid et al., “Enriched Protein Screening of Human Bone Marrow Mesenchymal Stromal Cell Secretions Reveals MFAPS and PENK as Novel IL-10 Modulators”, Molecular Therapy, vol. 22. pp. 999-1007, 2014.

2013

J. C. Nickel et al., “Re: Continuous Intravesical Lidocaine Treatment for Interstitial Cystitis/Bladder Pain Syndrome: Safety and Efficacy of a New Drug Delivery Device”, Journal of Urology, vol. 189. pp. 2131-2131, 2013.

2012

Q. Ong, Hochberg, F. H., and Cima, M. J., “Device for Treatment of Brain Tumor Associated Edema”, European Journal of Cancer, vol. 48. pp. 35-35, 2012.
B. C. Masi et al., “Intracranial MEMS based temozolomide delivery in a 9L rat gliosarcoma model”, Biomaterials, vol. 33. pp. 5768-5775, 2012.
C. Nickel et al., “Continuous Intravesical Lidocaine Treatment for Interstitial Cystitis/Bladder Pain Syndrome: Safety and Efficacy of a New Drug Delivery Device”, Science Translational Medicine, vol. 4. 2012.
R. Farra et al., “First-in-Human Testing of a Wirelessly Controlled Drug Delivery Microchip”, Science Translational Medicine, vol. 4. 2012.

2011

A. W. Scott et al., “Intracranial microcapsule drug delivery device for the treatment of an experimental gliosarcoma model”, Biomaterials, vol. 32. pp. 2532-2539, 2011.
Y. Ling, Pong, T., Vassiliou, C. C., Huang, P. L., and Cima, M. J., “Implantable magnetic relaxation sensors measure cumulative exposure to cardiac biomarkers”, Nature Biotechnology, vol. 29. pp. 273 - U137, 2011.
H. Lee and Cima, M. J., “An intravesical device for the sustained delivery of lidocaine to the bladder”, Journal of Controlled Release, vol. 149. pp. 133-139, 2011.
M. J. Cima, “Microsystem Technologies for Medical Applications”, in Annual Review of Chemical and Biomolecular Engineering, Vol 2, vol. 2, 2011, pp. 355-378.

2010

K. A. Brown, Vassiliou, C. C., Issadore, D., Berezovsky, J., Cima, M. J., and Westervelt, R. M., “Scaling of transverse nuclear magnetic relaxation due to magnetic nanoparticle aggregation”, Journal of Magnetism and Magnetic Materials, vol. 322. pp. 3122-3126, 2010.
I. S. Tobias, Lee, H., Engelmayr, G. C., Macaya, D., Bettinger, C. J., and Cima, M. J., “Zero-order controlled release of ciprofloxacin-HCl from a reservoir-based, bioresorbable and elastomeric device”, Journal of Controlled Release, vol. 146. pp. 356-362, 2010.
N. M. Elman, Daniel, K., Jalali-Yazdi, F., and Cima, M. J., “Super permeable nano-channel membranes defined with laser interferometric lithography”, Microfluidics and Nanofluidics, vol. 8. pp. 557-563, 2010.
N. M. Elman, Masi, B. C., Cima, M. J., and Langer, R., “Electro-thermally induced structural failure actuator (ETISFA) for implantable controlled drug delivery devices based on Micro-Electro-Mechanical-Systems”, Lab on a Chip, vol. 10. pp. 2796-2804, 2010.
Y. Ling, Vassiliou, C. C., and Cima, M. J., “Magnetic relaxation-based platform for multiplexed assays”, Analyst, vol. 135. pp. 2360-2364, 2010.

2009

K. D. Daniel et al., “Implantable diagnostic device for cancer monitoring”, Biosensors & Bioelectronics, vol. 24. pp. 3252-3257, 2009.
D. E. Wesolowski, Patta, Y. R., and Cima, M. J., “Conversion behavior comparison of TFA-MOD and non-fluorine solution-deposited YBCO films”, Physica C-Superconductivity and Its Applications, vol. 469. pp. 766-773, 2009.
N. M. Elman, Duc, H. L. H., and Cima, M. J., “An implantable MEMS drug delivery device for rapid delivery in ambulatory emergency care”, Biomedical Microdevices, vol. 11. pp. 625-631, 2009.
C. Bauer, Cima, M. J., Dellert, A., and Roosen, A., “Stress Development During Drying of Aqueous Zirconia Based Tape Casting Slurries Measured by Transparent Substrate Deflection Method”, Journal of the American Ceramic Society, vol. 92. pp. 1178-1185, 2009.
N. M. Elman, Patta, Y., Scott, A. W., Masi, B., Duc, H. L. H., and Cima, M. J., “The Next Generation of Drug-Delivery Microdevices”, Clinical Pharmacology & Therapeutics, vol. 85. pp. 544-547, 2009.
Y. R. Patta, Wesolowski, D. E., and Cima, M. J., “Aqueous polymer-nitrate solution deposition of YBCO films”, Physica C-Superconductivity and Its Applications, vol. 469. pp. 129-134, 2009.

2008

A. Z. Wang et al., “Superparamagnetic iron oxide nanoparticle-aptamer bioconjugates for combined prostate cancer imaging and therapy”, Chemmedchem, vol. 3. pp. 1311-1315, 2008.
R. Hong, Cima, M. J., Weissleder, R., and Josephson, L., “Magnetic microparticle aggregation for viscosity determination by MR”, Magnetic Resonance in Medicine, vol. 59. pp. 515-520, 2008.
N. Elman et al., Micro- and Nano-Electro Mechanical (MEMS and NEMS)-based Technologies for Implanted Biomedical Devices. 2008.

2007

S. Taktak, Sosnovik, D., Cima, M. J., Weissfeder, R., and Josephson, L., “Multiparameter magnetic relaxation switch assays”, Analytical Chemistry, vol. 79. pp. 8863-8869, 2007.
G. Y. Kim, Josephson, L., Langer, R., and Cima, M. J., “Magnetic relaxation switch detection of human chorionic gonadotrophin”, Bioconjugate Chemistry, vol. 18. pp. 2024-2028, 2007.
G. Y. Kim et al., “Resorbable polymer microchips releasing BCNU inhibit tumor growth in the rat 9L flank model”, Journal of Controlled Release, vol. 123. pp. 172-178, 2007.
R. Hong, Cima, M. J., Weissleder, R., and Josephson, L., “COLL 174-Magnetic field induced particle clustering and its application in viscosity measurement”, Abstracts of Papers of the American Chemical Society, vol. 234. 2007.
R. Hong, Cima, M. J., Weissleder, R., and Josephson, L., “COLL 360-Magnetic resonance sensing applications of enhanced sensitivity”, Abstracts of Papers of the American Chemical Society, vol. 234. 2007.
S. Taktak, Sosnovik, D., Cima, M. J., Weissleder, R., and Josephson, L., “INOR 491-NMR-based sensors using iron oxide nanoparticles”, Abstracts of Papers of the American Chemical Society, vol. 234. 2007.
D. E. Wesolowski, Yoshizumi, M., and Cima, M. J., “Understanding the MOD process between decomposition and YBCO formation”, Ieee Transactions on Applied Superconductivity, vol. 17. pp. 3351-3354, 2007.
D. E. Wesolowski and Cima, M. J., “Large-area quantification of BaCeO3 formation during processing of metalorganic-deposition-derived YBCO films”, Journal of Materials Research, vol. 22. pp. 1077-1081, 2007.
C. M. Kitsos et al., “Combination of automated high throughput platforms, flow cytometry, and hierarchical clustering to detect cell state”, Cytometry Part A, vol. 71A. pp. 16-27, 2007.
K. D. Daniel, Kim, G. Y., Vassiliou, C. C., Jalali-Yazdi, F., Langer, R., and Cima, M. J., “Multi-reservoir device for detecting a soluble cancer biomarker”, Lab on a Chip, vol. 7. pp. 1288-1293, 2007.
A. Z. Wang et al., “Novel targeted aptamer-superparamagnetic iron oxide nanoparticle bioconjugates for combined prostate cancer imaging and therapy”, International Journal of Radiation Oncology Biology Physics, vol. 69. pp. S110 - S111, 2007.
B. D. Kernan, Sachs, E. M., Oliveira, M. A., and Cima, M. J., “Three-dimensional printing of tungsten carbide-10 wt% cobalt using a cobalt oxide precursor”, International Journal of Refractory Metals & Hard Materials, vol. 25. pp. 82-94, 2007.

2006

D. E. Wesolowski, Yoshizumi, M., and Cima, M. J., “Trajectory-property relationships in MOD-derived YBCO films”, Physica C-Superconductivity and Its Applications, vol. 450. pp. 76-82, 2006.
J. W. Bullard and Cima, M. J., “Orientation dependence of the isoelectric point of TiO2 (rutile) surfaces”, Langmuir, vol. 22. pp. 10264-10271, 2006.
H. Lee and Cima, M. J., “An atornization method using an oscillating needle and a micro airjet”, Chemical Engineering Science, vol. 61. pp. 5919-5923, 2006.
A. Morini et al., “Reversible severe subacute respiratory failure in a case of chronic long-standing dysimmune motor polyneuropathy”, Journal of the Peripheral Nervous System, vol. 11. pp. 196-196, 2006.
M. Staples, Daniel, K., Cima, M. J., and Langer, R., “Application of micro- and nano-electromechanical devices to drug delivery”, Pharmaceutical Research, vol. 23. pp. 847-863, 2006.
D. E. Wesolowski and Cima, M. J., “Nitrate-based metalorganic deposition of CeO2 on yttria-stabilized zirconia”, Journal of Materials Research, vol. 21. pp. 1-4, 2006.

2005

T. Williams et al., “Inhibition of a rat flank gliosarcoma using a chemotherapeutic agent released from a microelectromechanical systems device”, Journal of Neurosurgery, vol. 103. pp. A947 - A947, 2005.
Y. W. Li et al., “In vivo delivery of BCNU from a MEMS device to a tumor model”, Journal of Controlled Release, vol. 106. pp. 138-145, 2005.
M. Yoshizumi, Wesolowski, D., and Cima, M. J., “Determination of HF partial pressure during ex situ conversion of YBCO precursors”, Physica C-Superconductivity and Its Applications, vol. 423. pp. 75-82, 2005.
A. C. R. Grayson, Cima, M. J., and Langer, R., “Size and temperature effects on poly(lactic-co-glycolic acid) degradation and microreservoir device performance”, Biomaterials, vol. 26. pp. 2137-2145, 2005.
A. M. Johnson, Sadoway, D. R., Cima, M. J., and Langer, R., “Design and testing of an impedance-based sensor for monitoring drug delivery”, Journal of the Electrochemical Society, vol. 152. pp. H6 - H11, 2005.
H. R. Wang, Cima, M. J., Kernan, B. D., and Sachs, E. M., “Gradient-index (GRIN) lenses and other optical elements by slurry-based three dimensional printing”, in Advances in Photonic Materials and Devices, vol. 163, 2005, pp. 17-28.

2004

R. S. Shawgo et al., “Repeated in vivo electrochemical activation and the biological effects of microelectromechanical systems drug delivery device”, Journal of Biomedical Materials Research Part A, vol. 71A. pp. 559-568, 2004.
H. R. Wang, Cima, M. J., Kernan, B. D., and Sachs, E. M., “Alumina-doped silica gradient-index (GRIN) lenses by slurry-based three-dimensional printing (S-3DP (TM))”, Journal of Non-Crystalline Solids, vol. 349. pp. 360-367, 2004.
Y. W. Li et al., “In vivo release from a drug delivery MEMS device”, Journal of Controlled Release, vol. 100. pp. 211-219, 2004.
R. J. Kershner, Bullard, J. W., and Cima, M. J., “The role of electrochemical reactions during electrophoretic particle deposition”, Journal of Colloid and Interface Science, vol. 278. pp. 146-154, 2004.
Y. W. Li et al., “C-14-labeled BCNU release kinetics from a drug delivery MEMS device.”, Abstracts of Papers of the American Chemical Society, vol. 228. pp. U374 - U374, 2004.
A. C. R. Grayson, Cima, M. J., and Langer, R., “Molecular release from a polymeric microreservoir device: Influence of chemistry, polymer swelling, and loading on device performance”, Journal of Biomedical Materials Research Part A, vol. 69A. pp. 502-512, 2004.
R. J. Kershner, Bullard, J. W., and Cima, M. J., “Zeta potential orientation dependence of sapphire substrates”, Langmuir, vol. 20. pp. 4101-4108, 2004.
M. Yoshizumi, Seleznev, I., and Cima, M. J., “Reactions of oxyfluoride precursors for the preparation of barium yttrium cuprate films”, Physica C-Superconductivity and Its Applications, vol. 403. pp. 191-199, 2004.
G. Voskerician, Shawgo, R. S., Hiltner, P. A., Anderson, J. M., Cima, M. J., and Langer, R., “In vivo inflammatory and wound healing effects of gold electrode voltammetry for MEMS micro-reservoir drug delivery device”, Ieee Transactions on Biomedical Engineering, vol. 51. pp. 627-635, 2004.
S. L. Monissette et al., “High-throughput crystallization: polymorphs, salts, co-crystals and solvates of phan-naceutical solids”, Advanced Drug Delivery Reviews, vol. 56. pp. 275-300, 2004.
A. C. R. Grayson, Shawgo, R. S., Li, Y. W., and Cima, M. J., “Electronic MEMS for triggered delivery”, Advanced Drug Delivery Reviews, vol. 56. pp. 173-184, 2004.
C. K. Lai, Zahari, A., Miller, B., Katstra, W. E., Cima, M. J., and Cooney, C. L., “Nondestructive and on-line monitoring of tablets using light-induced fluorescence technology.”, AAPS PharmSciTech, vol. 5. pp. E3 - E3, 2004.
A. C. R. Grayson et al., “A BioMEMS review: MEMS technology for physiologically integrated devices”, Proceedings of the Ieee, vol. 92. pp. 6-21, 2004.
J. W. Bullard, Kershner, R. J., and Cima, M. J., “Scanning probe characterization of localized pH changes on a sapphire surface in the presence of an applied field”, in Micro- and Nanosystems, vol. 782, 2004, pp. 57-62.
G. Y. Kim, Grayson, A. C. R., Cima, M. J., and Langer, R., “Biodegradable, multireservoir microdevice for drug delivery”, in Architecture and Application of Biomaterials and Biomolecular Materials, vol. 1, 2004, pp. 437-441.
Y. W. Li and Cima, M. J., “Bulge test on free standing gold thin films”, in Thin Films-Stresses and Mechanical Properties X, vol. 795, 2004, pp. 437-442.
A. C. R. Grayson, Voskerician, G., Lynn, A., Anderson, J. M., Cima, M. J., and Langer, R., “Differential degradation rates in vivo and in vitro of biocompatible poly(lactic acid) and poly(glycolic acid) homo- and co-polymers for a polymeric drug-delivery microchip”, Journal of Biomaterials Science-Polymer Edition, vol. 15. pp. 1281-1304, 2004.

2003

N. T. Flynn, Tran, T. N. T., Cima, M. J., and Langer, R., “Long-term stability of self-assembled monolayers in biological media”, Langmuir, vol. 19. pp. 10909-10915, 2003.
A. C. R. Grayson et al., “Multi-pulse drug delivery from a resorbable polymeric microchip device”, Nature Materials, vol. 2. pp. 767-772, 2003.
S. A. Uhland, Cima, M. J., and Sachs, E. M., “Additive-enhanced redispersion of ceramic agglomerates”, Journal of the American Ceramic Society, vol. 86. pp. 1487-1492, 2003.
G. Voskerician et al., “Biocompatibility and biofouling of MEMS drug delivery devices”, Biomaterials, vol. 24. pp. 1959-1967, 2003.
S. L. Morissette, Soukasene, S., Levinson, D., Cima, M. J., and Almarsson, O., “Elucidation of crystal form diversity of the HIV protease inhibitor ritonavir by high-throughput crystallization”, Proceedings of the National Academy of Sciences of the United States of America, vol. 100. pp. 2180-2184, 2003.
H. R. Wang, Cima, M. J., and Sachs, E. M., “Alumina-doped silica gradient-index (GRIN) lenses by slurry-based three-dimensional printing (S-3DP (TM))”, in Rapid Prototyping Technologies, vol. 758, 2003, pp. 35-40.

2002

W. S. Koegler, Patrick, C., Cima, M. J., and Cima, L., “Carbon dioxide extraction of residual chloroform from biodegradable polymers”, Journal of Biomedical Materials Research, vol. 63. pp. 567-576, 2002.
R. S. Shawgo, Grayson, A. C. R., Li, Y. W., and Cima, M. J., “BioMEMS for drug delivery”, Current Opinion in Solid State & Materials Science, vol. 6. pp. 329-334, 2002.
R. K. Holman, Cima, M. J., Uhland, S. A., and Sachs, E., “Spreading and infiltration of inkjet-printed polymer solution droplets on a porous substrate”, Journal of Colloid and Interface Science, vol. 249. pp. 432-440, 2002.
J. Moon, Grau, J. E., Knezevic, V., Cima, M. J., and Sachs, E. M., “Ink-jet printing of binders for ceramic components”, Journal of the American Ceramic Society, vol. 85. pp. 755-762, 2002.
R. K. Holman, Uhland, S. A., Cima, M. J., and Sachs, E., “Surface adsorption effects in the inkjet printing of an aqueous polymer solution on a porous oxide ceramic substrate”, Journal of Colloid and Interface Science, vol. 247. pp. 266-274, 2002.
H. R. Wang and Cima, M. J., “Three-dimensional printing (3DP (TM)) of gradient-index (GRIN) lenses”, in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites Vi, vol. 135, 2002, pp. 191-201.
R. J. Kershner and Cima, M. J., “Electrophoretic assembly of micron scale silica particles”, in Innovative Processing and Synthesis of Ceramics, Glasses, and Composites Vi, vol. 135, 2002, pp. 139-150.
M. M. Tupper, Chopinaud, M. E., Ogawa, T., and Cima, M. J., “Electrostatic dispensing of dry dielectric materials”, in Combinatorial and Artificial Intelligence Methods in Materials Science, vol. 700, 2002, pp. 195-200.
R. J. Kershner and Cima, M. J., In-situ observation of electrophoretic deposition using patterned microelectrodes, vol. 2002. 2002.
Y. W. Li, Shawgo, R. S., Langer, R., and Cima, M. J., Mechanical testing of gold membranes on a MEMS device for drug delivery. 2002.

2001

S. A. Uhland, Holman, R. K., Morissette, S., Cima, M. J., and Sachs, E. M., “Strength of green ceramics with low binder content”, Journal of the American Ceramic Society, vol. 84. pp. 2809-2818, 2001.
J. Moon, Caballero, A. C., Hozer, L., Chiang, Y. M., and Cima, M. J., “Fabrication of functionally graded reaction infiltrated SiC-Si composite by three-dimensional printing (3DP (TM)) process”, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 298. pp. 110-119, 2001.
M. J. Cima et al., Semisolid solidification of high temperature superconducting oxides. 2001.

2000

S. Annavarapu et al., “Progress towards a low-cost coated conductor technology”, Physica C, vol. 341. pp. 2319-2322, 2000.
J. Moon, Grau, J. E., Cima, M. J., and Sachs, E. M., “Slurry chemistry control to produce easily redispersible ceramic powder compacts”, Journal of the American Ceramic Society, vol. 83. pp. 2401-2408, 2000.
J. T. Santini, Richards, A. C., Scheidt, R. A., Cima, M. J., and Langer, R. S., “Microchip technology in drug delivery”, Annals of Medicine, vol. 32. pp. 377-379, 2000.
C. W. Rowe, Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., and Cima, M. J., “Multimechanism oral dosage forms fabricated by three dimensional printing (TM)”, Journal of Controlled Release, vol. 66. pp. 11-17, 2000.
W. E. Katstra, Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., and Cima, M. J., “Oral dosage forms fabricated by Three Dimensional Printing (TM)”, Journal of Controlled Release, vol. 66. pp. 1-9, 2000.
E. Sachs, Wylonis, E., Allen, S. M., Cima, M. J., and Guo, H. L., “Production of injection molding tooling with conformal cooling channels using the three dimensional printing process”, Polymer Engineering and Science, vol. 40. pp. 1232-1247, 2000.
J. T. Santini, Cima, M. J., and Langer, R. S., “Microchips for drug delivery.”, Abstracts of Papers of the American Chemical Society, vol. 219. pp. U34 - U34, 2000.
L. M. Svedberg, Arndt, K. C., and Cima, M. J., “Corrosion of aluminum nitride (AlN) in aqueous cleaning solutions”, Journal of the American Ceramic Society, vol. 83. pp. 41-46, 2000.
J. T. Santini, Richards, A. C., Scheidt, R., Cima, M. J., and Langer, R., “Microchips as controlled drug-delivery devices”, Angewandte Chemie-International Edition, vol. 39. pp. 2397-2407, 2000.
R. A. Scheidt et al., Microchips as implantable drug delivery devices. 2000.

1999

J. E. Grau, Uhland, S. A., Moon, J., Cima, M. J., and Sachs, E. M., “Controlled cracking of multilayer ceramic bodies”, Journal of the American Ceramic Society, vol. 82. pp. 2080-2086, 1999.
J. A. Smith, Cima, M. J., and SONNENBERG, N., “High critical current density thick MOD-derived YBCO films”, Ieee Transactions on Applied Superconductivity, vol. 9. pp. 1531-1534, 1999.
T. R. Jackson, Liu, H., Patrikalakis, N. M., Sachs, E. M., and Cima, M. J., “Modeling and designing functionally graded material components for fabrication with local composition control”, Materials & Design, vol. 20. pp. 63-75, 1999.
B. M. Wu and Cima, M. J., “Effects of solvent-particle interaction kinetics on microstructure formation during three-dimensional printing”, Polymer Engineering and Science, vol. 39. pp. 249-260, 1999.
J. T. Santini, Cima, M. J., and Langer, R., “A controlled-release microchip”, Nature, vol. 397. pp. 335-338, 1999.
X. R. Xu, Sachs, E., Allen, S. M., and Cima, M. J., Design tools for rapid thermal cycling. 1999.
E. Sachs, Allen, S. M., Hadjiloucas, C., Yoo, J., and Cima, M. J., “Low shrinkage metal skeletons by Three Dimensional Printing”, in Solid Freeform Fabrication Proceedings, August 1999, 1999, pp. 411-426.
S. Uhland et al., “Three-Dimensional Printing, 3DP (TM), of electronic ceramic components”, in Solid Freeform Fabrication Proceedings, August 1999, 1999, pp. 865-872.

1998

S. S. Kim et al., “Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels”, Annals of Surgery, vol. 228. pp. 8-13, 1998.
H. Shen et al., “Solidification of YBa2Cu3O6+delta: Part I. Morphology”, Journal of Materials Research, vol. 13. pp. 565-573, 1998.
J. Yoo, Cho, K. M., Bae, W. S., Cima, M. J., and Suresh, S., “Transformation-toughened ceramic multilayers with compositional gradients”, Journal of the American Ceramic Society, vol. 81. pp. 21-32, 1998.
X. R. Xu, Sachs, E., Allen, S. M., and Cima, M. J., “Designing conformal cooling channels for tooling”, in Solid Freeform Fabrication Proceedings, August, 1998, 1998, pp. 131-146.
L. M. Svedberg, Arndt, K. C., and Cima, M. J., “The gel plating process for selective gold metallization of electronic packages”, in 1998 International Symposium on Microelectronics, vol. 3582, 1998, pp. 258-263.
T. R. Jackson, Patrikalakis, N. M., Sachs, E. M., and Cima, M. J., “Modeling and designing components with locally controlled composition”, in Solid Freeform Fabrication Proceedings, August, 1998, 1998, pp. 259-266.

1997

K. G. Ressler, SONNENBERG, N., and Cima, M. J., “Mechanism of biaxial alignment of oxide thin films during ion-beam-assisted deposition”, Journal of the American Ceramic Society, vol. 80. pp. 2637-2648, 1997.
K. G. Ressler, SONNENBERG, N., and Cima, M. J., “The relation between ion damage anisotropy and IBAD YSZ biaxial alignment”, Ieee Transactions on Applied Superconductivity, vol. 7. pp. 1432-1435, 1997.
M. F. Ng and Cima, M. J., “Heteroepitaxial growth of lanthanum aluminate films derived from mixed metal nitrates”, Journal of Materials Research, vol. 12. pp. 1306-1314, 1997.
J. Yoo, Rowe, C. W., Wu, B. M., Palazzolo, R. D., Cima, M. J., and Monkhouse, D. C., “Release rate control of tablets manufactured by the TheriForm process.”, Abstracts of Papers of the American Chemical Society, vol. 213. p. 7 - BIOT, 1997.
M. J. Powers et al., “Adhesion phenomena in the organization and morphogenesis of liver cells.”, Abstracts of Papers of the American Chemical Society, vol. 213. p. 335 - COLL, 1997.
B. M. Wu, Palazzolo, R. D., Rowe, C. W., and Cima, M. J., “Drop-on demand deposition of drugs”, Abstracts of Papers of the American Chemical Society, vol. 213. p. 5 - BIOT, 1997.
S. Honjo et al., “Seeded crystal growth of YBa2Cu3O6.5 in semisolid melts”, Journal of Materials Research, vol. 12. pp. 880-890, 1997.
C. W. Rowe and Cima, M. J., “Leaching of sodium silicate-based slurries”, American Ceramic Society Bulletin, vol. 76. pp. 81-83, 1997.
J. Grau, Moon, J., Uhland, S., Cima, M. J., and Sachs, E., “High green density ceramic components fabricated by the slurry-based 3DP process”, in Solid Freeform Fabrication Proceedings, September 1997, 1997, pp. 371-378.
L. Cima, Wu, B., Cima, M. J., Powers, M. J., Chaignaud, B., and Vacanti, J. P., “In vitro organogenesis of liver tissue”, in Bioartificial Organs: Science, Medicine, and Technology, vol. 831, 1997, pp. 382-397.
E. Sachs et al., “Progress on tooling by 3D printing; Conformal cooling, dimensional control, surface finish and hardness”, in Solid Freeform Fabrication Proceedings, September 1997, 1997, pp. 115-123.

1996

B. M. Wu, Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., and Cima, M. J., “Solid free-form fabrication of drug delivery devices”, Journal of Controlled Release, vol. 40. pp. 77-87, 1996.
K. HIRAKATA, Rhine, W. E., and Cima, M. J., “Surface chemistry of lead titanate and its impact on binder removal”, Journal of the American Ceramic Society, vol. 79. pp. 1002-1008, 1996.
L. Cima, Chaignaud, B., Wu, B., Vacanti, J. P., and Cima, M. J., “Hierarchical devices for tissue engineering”, Abstracts of Papers of the American Chemical Society, vol. 211. p. 1 - BTEC, 1996.
P. C. McIntyre, Ressler, K. G., SONNENBERG, N., and Cima, M. J., “Transmission electron microscopy investigation of biaxial alignment development in YSZ films fabricated using ion beam assisted deposition”, Journal of Vacuum Science & Technology a-Vacuum Surfaces and Films, vol. 14. pp. 210-215, 1996.
K. G. Ressler, SONNENBERG, N., and Cima, M. J., “The development of biaxial alignment in yttria-stabilized zirconia films fabricated by ion beam assisted deposition”, Journal of Electronic Materials, vol. 25. pp. 35-42, 1996.
R. A. Giordano, Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., and Cima, M. J., “Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing”, Journal of Biomaterials Science-Polymer Edition, vol. 8. pp. 63-75, 1996.
K. G. Ressler, SONNENBERG, N., and Cima, M. J., “TEM and X-ray investigation of single crystal-like zirconia films fabricated by dual ion beam deposition”, in Ion-Solid Interactions for Materials Modification and Processing, vol. 396, 1996, pp. 605-610.

1995

K. HIRAKATA, Rhine, W., and Cima, M. J., “CARBON DETERMINATION IN SMALL AMOUNTS OF CERAMIC POWDER BY COULOMBIC TITRATION”, Journal of the American Ceramic Society, vol. 78. pp. 2834-2836, 1995.
K. NASHIMOTO, Cima, M. J., MCINTYRE, P. C., and Rhine, W., “MICROSTRUCTURE DEVELOPMENT OF SOL-GEL DERIVED EPITAXIAL LINBO3 THIN-FILMS”, Journal of Materials Research, vol. 10. pp. 2564-2572, 1995.
K. HIRAKATA, Rhine, W., and Cima, M. J., “ORGANIC-ACID ADSORPTION ON LEAD TITANATE SURFACES”, Journal of the American Ceramic Society, vol. 78. pp. 2563-2565, 1995.
R. Giordano, Cima, M. J., and Pober, R., “Effect of surface finish on the flexural strength of feldspathic and aluminous dental ceramics.”, The International journal of prosthodontics, vol. 8. pp. 311-9, 1995.
P. C. MCINTYRE, CHANG, B. P., SONNENBERG, N., and Cima, M. J., “DEFECT FORMATION IN EPITAXIAL OXIDE DIELECTRIC LAYERS DUE TO SUBSTRATE SURFACE-RELIEF”, Journal of Electronic Materials, vol. 24. pp. 735-745, 1995.
P. C. MCINTYRE, Cima, M. J., and ROSHKO, A., “EPITAXIAL NUCLEATION AND GROWTH OF CHEMICALLY DERIVED BA2YCU3O7-X THIN-FILMS ON (001) SRTIO3”, Journal of Applied Physics, vol. 77. pp. 5263-5272, 1995.
P. C. MCINTYRE, Cima, M. J., and ROSHKO, A., “THE EFFECTS OF SUBSTRATE SURFACE STEPS ON THE MICROSTRUCTURE OF EPITAXIAL BA2YCU3O7-X THIN-FILMS ON (001) LAALO3”, Journal of Crystal Growth, vol. 149. pp. 64-73, 1995.
A. M. FIGUEREDO et al., “PROPERTIES OF BA2YCU3O7-DELTA FILAMENTS DIRECTIONALLY SOLIDIFIED BY THE LASER-HEATED FLOATING-ZONE TECHNIQUE”, Physica C, vol. 241. pp. 92-102, 1995.
E. Sachs et al., Injection molding tooling by three dimensional printing, a desktop manufacturing process. 1995.
S. -J. J. Lee, Sachs, E., and Cima, M. J., “Layer position accuracy in powder-based rapid prototyping”, Rapid Prototyping Journal, vol. 1. pp. 24-37, 1995.

1994

P. C. MCINTYRE and Cima, M. J., “MICROSTRUCTURAL INHOMOGENEITIES IN CHEMICALLY DERIVED BA2YCU3O7-X THIN-FILMS - IMPLICATIONS FOR FLUX-PINNING”, Journal of Materials Research, vol. 9. pp. 2778-2788, 1994.
P. C. MCINTYRE and Cima, M. J., “HETEROEPITAXIAL GROWTH OF CHEMICALLY DERIVED EX-SITU BA2YCU3O7-X THIN-FILMS”, Journal of Materials Research, vol. 9. pp. 2219-2230, 1994.
R. J. HIGGINS, Rhine, W., Cima, M. J., BOWEN, H. K., and FARNETH, W. E., “CERAMIC SURFACE-REACTIONS AND CARBON RETENTION DURING NONOXIDATIVE BINDER REMOVAL - AL2O3 POLY(METHYL METHACRYLATE) AT 20-DEGREES-700-DEGREES-C”, Journal of the American Ceramic Society, vol. 77. pp. 2243-2253, 1994.
A. M. FIGUEREDO, Cima, M. J., FLEMINGS, M. C., and HAGGERTY, J. S., “DIRECTIONAL PHASE-FORMATION ON MELTING VIA PERITECTIC REACTION”, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, vol. 25. pp. 1747-1760, 1994.
J. A. LEWIS, Cima, M. J., and Rhine, W., “DIRECT OBSERVATION OF PRECERAMIC AND ORGANIC BINDER DECOMPOSITION IN 2-D MODEL MICROSTRUCTURES”, Journal of the American Ceramic Society, vol. 77. pp. 1839-1845, 1994.
H. ISHII, HARA, T., HIRANO, S., FIGUEREDO, A. M., and Cima, M. J., “MAGNETIZATION BEHAVIOR AND CRITICAL-CURRENT DENSITY ALONG THE C-AXIS IN MELT-GROWN YBCO FIBER CRYSTAL”, Physica C, vol. 225. pp. 91-100, 1994.
N. SONNENBERG, RESSLER, K. G., MCINTYRE, P. C., and Cima, M. J., “THE INFLUENCE OF PROCESSING PARAMETERS ON THE DEVELOPMENT OF BIAXIALLY ALIGNED ZIRCONIA THIN-FILMS DEPOSITED BY ION-BEAM-ASSISTED DEPOSITION”, in Epitaxial Oxide Thin Films and Heterostructures, vol. 341, 1994, pp. 163-168.
K. G. RESSLER, SONNENBERG, N., and Cima, M. J., “ION-BEAM-ASSISTED DEPOSITION OF BIAXIALLY ALIGNED CEO2 AND ZRO2 THIN-FILMS ON AMORPHOUS SUBSTRATES”, in Materials Synthesis and Processing Using Ion Beams, vol. 316, 1994, pp. 953-958.
E. Sachs et al., Micro-constructive manufacturing by 3D printing. 1994.
M. F. NG and Cima, M. J., “MICROSTRUCTURAL EVOLUTION OF EPITAXIAL MGAL2O4 THIN-FILMS DERIVED FROM METAL NITRATES AND FROM METAL ALKOXIDES”, in Mechanisms of Thin Film Evolution, vol. 317, 1994, pp. 577-582.
O. Signore, Loffredo, M., Gregori, M., and Cima, M. J., “Reconstruction of ER schema from database applications: A cognitive approach”, in Entity-Relationship Approach - Er \textquoteright94, vol. 881, 1994, pp. 387-402.
S. MICHAELS, SACHS, E. M., and Cima, M. J., “3-DIMENSIONAL PRINTING OF METAL AND CERMET PARTS”, in Advances in Powder Metallurgy & Particulate Materials - 1994, Vol 6: Advanced Processing Techniques, 1994, pp. 103-112.
M. F. NG and Cima, M. J., “CRYSTALLIZATION OF EPITAXIAL LANTHANUM ALUMINATE AND SPINEL THIN-FILMS DERIVED FROM NITRATE PRECURSORS”, in Epitaxial Oxide Thin Films and Heterostructures, vol. 341, 1994, pp. 145-150.
M. F. NG and Cima, M. J., “EPITAXIAL CHEMICALLY DERIVED LANTHANUM ALUMINATE FILMS FOR BA2YCU3O7-X DEVICES”, in Mechanisms of Thin Film Evolution, vol. 317, 1994, pp. 547-552.

1993

H. SAKAI, Cima, M. J., and Rhine, W., “ADSORPTION OF SULFONIC-ACID DOPED POLY(VINYL CHLORIDE) ON BARIUM FERRITE PARTICLES”, Journal of the American Ceramic Society, vol. 76. pp. 3136-3140, 1993.
R. C. CHIU, GARINO, T. J., and Cima, M. J., “DRYING OF GRANULAR CERAMIC FILMS .1. EFFECT OF PROCESSING VARIABLES ON CRACKING BEHAVIOR”, Journal of the American Ceramic Society, vol. 76. pp. 2257-2264, 1993.
N. SONNENBERG et al., “PREPARATION OF BIAXIALLY ALIGNED CUBIC ZIRCONIA FILMS ON PYREX GLASS SUBSTRATES USING ION-BEAM-ASSISTED DEPOSITION”, Journal of Applied Physics, vol. 74. pp. 1027-1034, 1993.
P. C. MCINTYRE and Cima, M. J., “MICROSTRUCTURAL EVOLUTION DURING EPITAXIAL-GROWTH OF CHEMICALLY DERIVED BA2YCU3O7-X THIN-FILMS”, in Evolution of Surface and Thin Film Microstructure, vol. 280, 1993, pp. 371-374.
C. R. KAGAN and Cima, M. J., “SOLUTION PRECIPITATION OF CDSE QUANTUM DOTS”, in Microcrystalline Semiconductors: Materials Science & Devices, vol. 283, 1993, pp. 841-846.

1992

E. Sachs, Cima, M. J., WILLIAMS, P., Brancazio, D., and CORNIE, J., “3-DIMENSIONAL PRINTING - RAPID TOOLING AND PROTOTYPES DIRECTLY FROM A CAD MODEL”, Journal of Engineering for Industry-Transactions of the Asme, vol. 114. pp. 481-488, 1992.
L. S. YUJAHNES, BROGAN, W. T., ANDERSON, A. C., and Cima, M. J., “A HIGH-FLUX ATOMIC OXYGEN SOURCE FOR THE DEPOSITION OF HIGH T(C) SUPERCONDUCTING FILMS”, Review of Scientific Instruments, vol. 63. pp. 4149-4153, 1992.
M. J. Cima et al., “SEMISOLID SOLIDIFICATION OF HIGH-TEMPERATURE SUPERCONDUCTING OXIDES”, Journal of Applied Physics, vol. 72. pp. 179-190, 1992.
P. C. MCINTYRE, Cima, M. J., SMITH, J. A., HALLOCK, R. B., SIEGAL, M. P., and PHILLIPS, J. M., “EFFECT OF GROWTH-CONDITIONS ON THE PROPERTIES AND MORPHOLOGY OF CHEMICALLY DERIVED EPITAXIAL THIN-FILMS OF BA2YCU3O7-X ON (001) LAALO3”, Journal of Applied Physics, vol. 71. pp. 1868-1877, 1992.
H. ENDO and Cima, M. J., “PREPARATION AND CHARACTERIZATION OF EPITAXIAL KNBO3 THIN-FILMS BY A SOL-GEL METHOD”, in Ferroelectric Thin Films Iii, vol. 310, 1992, pp. 325-330.
R. B. HALLOCK, Rhine, W., JOLLY, M. S., and Cima, M. J., BA2YCU3O7-X THIN-FILMS WITH JC GREATER-THAN 105 A/CM2 AT 77 K PREPARED, vol. 249. 1992.

1991

N. USHIFUSA and Cima, M. J., “AQUEOUS PROCESSING OF MULLITE-CONTAINING GREEN SHEETS”, Journal of the American Ceramic Society, vol. 74. pp. 2443-2447, 1991.
H. M. CHOW, JIANG, X. P., Cima, M. J., HAGGERTY, J. S., BRODY, H. D., and FLEMINGS, M. C., “EFFECTS OF ANNEALING ON THE MICROSTRUCTURE AND PHASE CHEMISTRY OF DIRECTIONALLY SOLIDIFIED BI2SR2CACU2O8”, Journal of the American Ceramic Society, vol. 74. pp. 1391-1396, 1991.
P. C. MCINTYRE, Cima, M. J., LIEBENBERG, D. H., and FRANCAVILLA, T. L., “MIXED-STATE BEHAVIOR IN LARGE MAGNETIC-FIELDS OF HIGH-TEMPERATURE SUPERCONDUCTING FILMS PREPARED BY METALORGANIC DEPOSITION”, Applied Physics Letters, vol. 58. pp. 2033-2035, 1991.
J. Luo et al., “GRAIN ALIGNMENT AND TRANSPORT-PROPERTIES OF BI2SR2CACU2O8 GROWN BY LASER-HEATED FLOAT ZONE METHOD”, Ieee Transactions on Magnetics, vol. 27. pp. 1499-1502, 1991.
K. NASHIMOTO and Cima, M. J., “EPITAXIAL LINBO3 THIN-FILMS PREPARED BY A SOL-GEL PROCESS”, Materials Letters, vol. 10. pp. 348-354, 1991.
E. Sachs et al., 3-DIMENSIONAL PRINTING - RAPID TOOLING AND PROTOTYPES DIRECTLY FROM CAD REPRESENTATION. 1991.
M. J. Cima, MCINTYRE, P. C., SMITH, J. A., CHANG, B. P., and HALLOCK, R. B., METALORGANIC DEPOSITION OF HIGH-JC BA2YCU3O7-X THIN-FILMS ON SINGLE-CRYSTAL SUBSTRATES, vol. 31. 1991.
K. NASHIMOTO, Cima, M. J., and Rhine, W., MICROSTRUCTURAL EVOLUTION OF EPITAXIAL LINBO3 THIN-FILMS DERIVED FROM METAL ALKOXIDE SOLUTIONS, vol. 202. 1991.

1990

P. C. MCINTYRE, Cima, M. J., NG, M. F., CHIU, R. C., and Rhine, W., “TEXTURE DEVELOPMENT IN BA2YCU3O7-X FILMS FROM TRIFLUOROACETATE PRECURSORS”, Journal of Materials Research, vol. 5. pp. 2771-2779, 1990.
P. C. MCINTYRE, Cima, M. J., and NG, M. F., “METALORGANIC DEPOSITION OF HIGH-JCBA2YCU3O7-X THIN-FILMS FROM TRIFLUOROACETATE PRECURSORS ONTO (100) SRTIO3”, Journal of Applied Physics, vol. 68. pp. 4183-4187, 1990.
J. R. Kelly, Giordano, R., Pober, R., and Cima, M. J., “Fracture surface analysis of dental ceramics: clinically failed restorations.”, The International journal of prosthodontics, vol. 3. pp. 430-40, 1990.
J. A. LEWIS and Cima, M. J., “DIFFUSIVITIES OF DIALKYL PHTHALATES IN PLASTICIZED POLY(VINYL BUTYRAL) - IMPACT ON BINDER THERMOLYSIS”, Journal of the American Ceramic Society, vol. 73. pp. 2702-2707, 1990.
M. J. Cima et al., “INFLUENCE OF GROWTH-PARAMETERS ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED BI2SR2CACU2OY”, Journal of Materials Research, vol. 5. pp. 1834-1849, 1990.
J. R. KELLY, POBER, R. L., and Cima, M. J., “DISSOLUTION OF ALUMINA DURING SINTERING OF ALUMINOUS PORCELAIN”, Journal of Dental Research, vol. 69. pp. 211-211, 1990.
H. M. CHOW, JIANG, X. P., Cima, M. J., HAGGERTY, J. S., BRODY, H. D., and FLEMINGS, M. C., PHASE CHEMISTRY AND MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED BI2SR2CACU2O8, vol. 169. 1990.
R. B. HALLOCK, REXER, P. O., JOLLY, M. S., Rhine, W., and Cima, M. J., POLYFUNCTIONAL CARBOXYLIC-ACIDS AS COPRECIPITATING AGENTS FOR BARIUM, YTTRIUM, AND COPPER, vol. 180. 1990.
E. Sachs, Cima, M. J., WILLIAMS, P., and Brancazio, D., RAPID TOOLING AND PROTYPING BY 3-DIMENSIONAL PRINTING. 1990.
E. BEYLIER, POBER, R. L., and Cima, M. J., CENTRIFUGAL CASTING OF CERAMIC COMPONENTS, vol. 12. 1990.

1989

M. G. KIM, Cima, M. J., and Searcy, A. W., “COMPARISON OF SIZES OF MAGNESIA CRYSTALS CALCULATED FROM X-RAY-DIFFRACTION LINE-BROADENING AND TRANSMISSION ELECTRON-MICROSCOPY OBSERVATIONS”, Journal of the American Ceramic Society, vol. 72. pp. 1514-1516, 1989.
M. J. Cima, LEWIS, J. A., and DEVOE, A. D., “BINDER DISTRIBUTION IN CERAMIC GREENWARE DURING THERMOLYSIS”, Journal of the American Ceramic Society, vol. 72. pp. 1192-1199, 1989.
M. J. Cima, DUDZIAK, M., and LEWIS, J. A., “OBSERVATION OF POLYVINYL BUTYRAL) - DIBUTYL PHTHALATE BINDER CAPILLARY MIGRATION”, Journal of the American Ceramic Society, vol. 72. pp. 1087-1090, 1989.
E. A. HOLM and Cima, M. J., “TWO-DIMENSIONAL WHISKER PERCOLATION IN CERAMIC MATRIX CERAMIC WHISKER COMPOSITES”, Journal of the American Ceramic Society, vol. 72. pp. 303-305, 1989.
E. A. HOLM and Cima, M. J., ZERO-SHRINKAGE WHISKER FRACTION IN CERAMIC MATRIX-CERAMIC WHISKER COMPOSITES, vol. 155. 1989.

1988

S. C. PETERSON and Cima, M. J., “MAGNETIC INDUCEMENT OF TEXTURE IN BA2YCU3O6.9 PARTICLE ASSEMBLIES UNDER CRYOGENIC CONDITIONS”, Journal of the American Ceramic Society, vol. 71. pp. C458 - C459, 1988.
M. J. Cima, SCHNEIDER, J. S., PETERSON, S. C., and COBLENZ, W., “REACTION OF BA2YCU3O6.9 FILMS WITH YTTRIA-STABILIZED ZIRCONIA SUBSTRATES”, Applied Physics Letters, vol. 53. pp. 710-712, 1988.

1987

M. J. Cima and Rhine, W., “POWDER PROCESSING FOR MICROSTRUCTURAL CONTROL IN CERAMIC SUPERCONDUCTORS”, Advanced Ceramic Materials, vol. 2. pp. 329-336, 1987.